作者maniaque (maniaque)
看板PC_Shopping
標題Re: [開箱] 打造高階工作站(5)-24x金士頓8GB ECC REG
時間Tue Jul 16 20:45:16 2013
※ 引述《hotdogee (hotdog)》之銘言: : ,兩個CPU總共是64個Rank,所以如果用了Quad-Rank的記憶體(Quad=4),每個CPU : 最多就只能插32/4=8條記憶體模組,兩個CPU就可以插64/4=16條記憶體模組。 : Supermicro X9DRi-LN4F+[http://goo.gl/x7VEz]這塊主機板每個通道都有3條DIMM : 插槽,所以如果每個通道要插三條記憶體就必須要用Dual-Rank(Dual=2)的記憶體 : 模組。附帶一提,同樣是8GB的記憶體模組,Quad-Rank模組都會比Dual-Rank模組 : 來的便宜,是因為製造Quad-Rank記憶體模組所需的DRAM記憶體顆粒成本比較低。 : [1] http://goo.gl/QH0Xo : [2] http://goo.gl/fcPXd 嗯.......其實這個說法有點問題....... 因為 Rank 多寡,牽涉到當時世代記憶體顆粒市場能拿到的規格. 打個比方,假設前幾年 4Gbit 顆粒還未上市前,市面上產出的最高規格就是 2Gbit 若你要做一條 8GB Module ,那就是 8GBx8bit = 64Gbit 64Gbit 用 2Gbit 顆粒去兜,就會是 32顆. 然而,若是用 x4 規格的 2Gb 顆粒,32顆總共會造成 128Bit(4x32=128) , 那就是Dual Rank(64bitx2) 若用了1Gb x4的顆粒,那顆粒數要加倍到64顆 ,而且因為都是 x4 那就會形成 256Bit ,那就會變成 Quad Rank (64bit x4) 可能要透過 stack 方式把顆粒疊起來(或者用其他方式併起來....) (這種特殊的模組,在 Server 用 Reg.DIMM 才看得到) 另外,根據印象,以前 x4 的顆粒報價反而比 x8 or x16 來的低一些,因為 【x4 顆粒用途很受限】 所以當年 Intel 晶片組不接受使用 x4 顆粒兜出來的 Module 時,VIA 晶片組 就特別設計能支援用 x4 顆粒的 Module. (因此當時有些低價模組就特別標榜 VIA /SIS 適用) So ,回歸正題,現在市面上都是 4Gb 顆粒,所以至少在 8Gb 顆粒推出前 4Gbit 的 x4 顆粒,用 32 顆可以兜出 16GB Dual Rank模組. x8 32 16GB Quad Rank --
※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 122.121.35.103
This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers. Five Filters recommends: 'You Say What You Like, Because They Like What You Say' - http://www.medialens.org/index.php/alerts/alert-archive/alerts-2013/731-you-say-what-you-like-because-they-like-what-you-say.html